Task Force Tips XFIH-E91A Task Force Tips Fire Fighting Equipment Nozzles, Monitors, Piercing Nozzles, Manifold, Ball Intake Valves, PRO/pak, Blitzfire and Suction Hose
New User?   Products  
Product Details
XFIH-E91A
HURRICANE RC 4.0"BSP MALE INLET


Part No:XFIH-E91A


 Details
HURRICANE RC 4.0"BSP MALE INLET 2.5"NH MALE OUTLET ALUMINUM


Monitor Configuration Fixed Mount
Flow Rate - Monitors 0-1250 gpm (0-4500 l/min)
Operation Energy Source Electric (12/24 vdc)
Monitor Inlet 4 Inch BSP Male
Monitor Outlet 2.5 inch (65mm)
Horizontal Control Handwheel (3 Inch, Injection Molded Nylon)
Horizontal Movement (degrees) 225 left and right of center
Vertical Control Handwheel (3 Inch, Injection Molded Nylon)
Vertical Movement (degrees) 45 below to 90 above horizontal
Safety Shutoff No Safety Shutoff
Pressure Relief Valve No PRV
Valve Design No Valve
Finish Powdercoated Stardust Silver
Certifications CE
Hazardous Location Certification N/A


     Related Videos   
    Programming Park Function on Monitors

    COPY URL LINK BELOW AND PASTE IT INTO AN EMAIL TO SHARE


    Programming An Oscillate Pattern on Monitors

    COPY URL LINK BELOW AND PASTE IT INTO AN EMAIL TO SHARE


    Hurricane Monitor

    COPY URL LINK BELOW AND PASTE IT INTO AN EMAIL TO SHARE


    Electrical Monitor Motor Board Troubleshooting

    COPY URL LINK BELOW AND PASTE IT INTO AN EMAIL TO SHARE


    Manually Testing RC Monitor Control Inputs

    COPY URL LINK BELOW AND PASTE IT INTO AN EMAIL TO SHARE


    Testing RC Monitor Base Board for Power

    COPY URL LINK BELOW AND PASTE IT INTO AN EMAIL TO SHARE


    Installing The Wire Basket on a TFT RC Monitor

    COPY URL LINK BELOW AND PASTE IT INTO AN EMAIL TO SHARE




 
•   TFT Hurricane Manual Monitor offers efficient flow performance up to 1250gpm, provides full 360 degree rotational movement, and is available with 3” or 4” ANSI 150 flanges, 3” NPT thread, or with extended flange inlets to eliminate rotational clearance issues. All models are FM approved, are standard with corrosion resistant powder coating and come with your choice of hand wheel and tiller bar operational controls.

•   TFT Hurricane Remote Control Monitors are designed for operational pressures up to 200psi, provide up to 450 degrees of rotational travel, and have an elevation range of 90 degrees above horizontal to 45 degrees below. All Hurricane RC monitors come standard with TFT’s rugged electronics design which eliminates corrosion issues caused by water migration to electronic circuitry, have been awarded CE approval, and are easily controlled by panel mounted, tethered, or radio frequency operational controls.

•   TFT Hurricane ATEX certified RC Monitors are designed for 12/24volt operations and are tested and approved for use in Classified Hazardous Locations as defined by European Directive 94/9/EC often referred to as the ATEX directive. This directive also indicates that the monitor and nozzles are suitable for Zone 2, Category 3 environments, use position encoding and current limiting for drive train protection, and have an IP65 rating for all electrical components.



Task Force Tips ® is a registered trademark of Task Force Tips, Inc.
TFT ® is a registered trademark of Task Force Tips, Inc.