Task Force Tips Fire Fighting Equipment Nozzles, Monitors, Piercing Nozzles, Manifold, Ball Intake Valves, PRO/pak, Blitzfire and Suction Hose
New User?   Products  
 
Extend-A-Gun Accessories
Accessories for an Extend-A-Gun that provides new capabilities for your deck mounted Master Stream device. For storage, it can be lowered to deck level (or even into a monitor well). On the fire ground, the monitor may be raised to its extended position (12 or 18 extra inches)(30.5 or 45.7 extra cm) by lifting the quick release and raising by hand until the non-rotating pipe locks into position. This gives greater clearance of other equipment on the apparatus, greater freedom of movement and allows a more comfortable operating position. The Extend-A-Gun offers a full 3” (75mm) or 4" (100mm)waterway, hardcoat anodized finish, and built-in sensor for connection to “monitor raised” light or truck open compartment warning. Can be specified with new, or retrofitted to existing apparatus.


7 Products Found
  XGA-RP
PANEL MOUNT RC EXTEND-A-GUN OPERATOR STATION This operator station allows the RC Extend-A-Gun to be controlled from a remote location when the user wants a separate control from a TFT RC monitor operator station or if there is no RC monitor up/down button available. The plate is designed to be flush mounted in a panel and a 12' long pre-connected cable. NOTE: This operator station is required if the RC Extend-A-Gun is not installed with a TFT RC Monitor and 6' companion cable which must be installed in RC Extend-A-Gun. Interface box is supplied.
  XGB-13
TUBE/SADDLE 3” BRACKET SETS For safe dependable service, the Extend-A-Gun MUST be securely mounted. To make the Extend-A-Gun as versatile as possible, three mounting bracket kits are offered. Each kit has a different upper bracket. The lower bracket is the same in all three.
  XGB-23
PLATE/SADDLE 3” BRACKET SETS For safe dependable service, the Extend-A-Gun MUST be securely mounted. To make the Extend-A-Gun as versatile as possible, three mounting bracket kits are offered. Each kit has a different upper bracket. The lower bracket is the same in all three.
  XGB-33
SADDLE/SADDLE 3” BRACKET SETS For safe dependable service, the Extend-A-Gun MUST be securely mounted. To make the Extend-A-Gun as versatile as possible, three mounting bracket kits are offered. Each kit has a different upper bracket. The lower bracket is the same in all three.
  XGB-43
PLATE/SADDLE 4” BRACKET SETS For safe dependable service, the Extend-A-Gun RC4 MUST be securely mounted. To make the Extend-A-Gun as versatile as possible, the 4” mounting brackets come in two styles. Each kit has a different upper bracket. The lower bracket is the same for both.
  XGB-53
SADDLE/SADDLE 4” BRACKET SETS For safe dependable service, the Extend-A-Gun RC4 MUST be securely mounted. To make the Extend-A-Gun as versatile as possible, the 4” mounting brackets come in two styles. Each kit has a different upper bracket. The lower bracket is the same for both.
  XGD-ST
EXT.-A-GUN DISPLAY STAND