11 Products Found

AC5A-SPECIAL GATE VALVE 2.5" SPECIAL   AC5B-SPECIAL GATE VALVE 2.5" SPECIAL   B-DC1040BC DUAL AGENT NOZZLE 1.0" NH (25mm) INLETS The nozzle for use with water or AFFF is identical to the DS1040BC (page 10) TFT BubbleCup nozzle with the exception of the pipe thread inlet.   B-DC75 DUAL AGENT NOZZLE 1.0"   B-DUAL DUAL AGENT NOZZLE 1.0" NPT (25mm) SWIVEL INLETS The nozzle for use with water or AFFF is identical to the B-BH (page 24) TFT ULTIMATIC 125 nozzle with the exception of the pipe thread inlet. It has fully automatic pressure control regulated to approximately 100 psi (7 bar) throughout the flow range of 10-125 gpm (40-500 l/min). Accepts the FJ-U FoamJet attachment. Mounted with BTFT-DC5 on single pistol grip.   B-DUAL-ND DUAL AGENT NOZZLE 1.0" NH (25mm) INLETS Same as above but with 1" NH (25mm) swivel inlets.   BTFT-DC5 DRY CHEM NOZZLE 5#/SEC 1.0" NPT (25mm) The dry chemical nozzle is designed for an application rate of 5 pounds per second (2.3kg/sec), utilizes the same slide-valve design as used for water application and a special front end designed for dry chemicals. The front end consists of the valve seat, a set of straightening fins, a straight through barrel section, and is designed to withstand the abrasive impact of the dry chemical agent. The nozzle operator can select from six valve settings to flow an appropriate rate of dry chemical agent up to the limit of the system. Effective reach of the cloud is 75 feet (23m) at full flow and proportionately less at partial valve settings. There is no adjustment of pattern shape. 1" NPT (25mm) swivel inlet is standard.   BTFT-DC5-ND DRY CHEM NOZZLE 5#/SEC 1.0" NPT (25mm) Same as above but with 1" NH (25mm) swivel inlet.   S-CN CELLAR "DISTRIBUTOR" NOZZLE" 2.5" NH (65mm) FEMALE INLET for reaching fires in hard to get at places. Ball bearing revolving action with rigid chromed brass base. Nine (9) varying angled discharge orifices, three (3) reaction and six (6) radial. Flows 280 gpm at 100 psi and 198 gpm at 50 psi (1060 l/min @ 7 bar and 750 l/min @ 3 bar). 2.5" NH (65mm) thread and metal protection cage is standard. Available in 2.5" NH thread only.   S-PN PIERCING APPLICATOR 1.5" NH (38mm) hardened tool steel point for driving through concrete block, mobile homes, and places where water and foam need to get. Flows 95 gpm at 100 psi (360 l/min @ 7 bar) with impinging jets for dense fog pattern. Ideal for use with Class A and AFFF foams. Dimension: 1.5" x 51.5" (3.8cm x 130.8cm) 1.5" NH thread only.   S-WC WATER CURTAIN 2.5" NH (65mm) INLET & OUTLET Water curtain: 35' width & 20' height. (10.7m x 6.1m) Swivel joint allows curtain to be directed in relationship to the hose line. Flow rate: 100 gpm at 100 psi (380 l/min @ 7 bar). 2.5" NH (65mm) female swivel inlet and 2.5" (65mm) male outlet with end cap and chain. End cap can be removed to allow the use of multiple units on one hose lay. Available in 2.5" NH thread only.