The Monsoon RC for pumper installations is an electric remote controlled monitor that has all the benefits of the Monsoon monitor with the addition of powered operation. It has a greater horizontal sweep angle than the RC model for Ladder or Platform installations. Designed for 12 VDC or 24 VDC operation, selection is automatic. The Monsoon RC comes with a factory installed control panel mounted on the monitor for controlling horizontal rotation, elevation, nozzle pattern and programmable PARK and Oscillate. The motor control circuits are factory installed on the monitor and use position encoders and current limiting to protect the drive train at the ends of travel. Unit comes with 30 feet (9m) of ultra-flexing robotics cable already wired to the monitor so installation effort is minimized. Cable has only four conductors (two for power and two for communications), further easing the installation effort. Cable is enclosed in a unique wire guide that allows 450° of horizontal travel (225° either side of a center position), which is far more reliable than slip rings or coil cords. Knobs for manual override are provided on the horizontal rotation and elevation drive. TFT’s Master ERP nozzles plugs into the factory installed nozzle power wire. Electric drives and control box are waterproof. Main waterway made from hard coat anodized ANSI 356-T6 aluminum. Silver powder coat finish inside and out. Standard outlet is 3.5” NH (89mm) rigid male thread. Other outlets are available. All TFT RC monitors are capable of being controlled by a programmable logic controller with full three-axis position control & feedback using the Allen Bradley EtherNet/IP protocol. Contact factory for details.


Weight 0
Vertical Movementdegrees -45 to 90
Vertical Control 3" Handwheel
Valve Design No Valve
Remote Control Yes
Outlet 3.5"BSP
Oscillation No
Operation Energy Source 12/24 VDC
Max Flow 2,000 gpm (7,600 l/min)
Inlet DN100, PN16
Horizontal Movementdegrees 225 left and right
Horizontal Control 3" Handwheel
Finish American Red
Certification ATEX
Apparatus Pumper