The Typhoon RC is an electrically operated monitor for flows up to 1500 gpm (6000 l/min). Maximum operating pressure is 200 psi (14 bar). Waterway with turning vane has only 19 psi (1.3 bar) loss at 1500 gpm (6000 l/min). Designed for 12 VDC or 24 VDC operation, selection is automatic. The Typhoon RC comes with a factory installed control panel mounted to the monitor for controlling horizontal rotation, elevation, nozzle pattern, and programmable PARK and Oscillate.The motor controls use position encoders and current limiting to protect the drive train at ends of travel. Knobs are installed so the monitor may be manually operated in the event of a power failure. Field changeable stops for horizontal travel at 45, 90, and 135° either side of a center position. Horizontal travel without stops is 225° left and right (450° total). Available with various inlet flanges and threaded fittings. Inlet also made for direct connection to TFT’s electric Extend-A-Gun RC3, RC4 and Valve Under Monitor Series. Main waterway made from hard coat anodized ANSI 356-T6 aluminum. Silver powder coat finish inside and out. Standard outlet is 3.5” NH (90 mm) male thread. Other outlets available. All TFT RC monitors are capable of being controlled by a programmable logic controller with full three-axis position control & feedback using the Allen Bradley EtherNet/IP protocol. Contact factory for details.


Apparatus Pumper
Certification ATEX
Finish American Red
Horizontal Control 3" Handwheel
Horizontal Movementdegrees 225 left and right
Inlet 3.0"NPT Female
Max Flow 1,500 gpm (6,000 l/min)
Operation Energy Source 12/24 VDC
Oscillation No
Outlet 3.5in (90mm) NH Male
Remote Control Yes
Valve Design No Valve
Vertical Control 3" Handwheel
Vertical Movementdegrees -45 to 90
Weight 0